Document Actions
Vintage Venom - Home of Mustang brake conversions
Vintage Venom's meticulously engineered designs use the highest quality materials and craftsmanship and exceed OE tolerances, while providing cost effective solutions. Vintage Venom is committed to providing you with the highest quality and performance at an affordable price. Additionally, all kits come with comprehensive technical support web sites to assist with installation.
SN95 Mustang (1994-2004):
• "Shelby GT500 BRAKE & WHEEL" conversion kit enables the upgrade to huge 14” Front GT500 Shelby Mustang brakes and the use of 18" x 9.5 S197 wheels, all in one kit. Both benefits are fully integrated into one comprehensive design.Vintage Mustang (1964-1973):
• "COBRA BRAKE & WHEEL" conversion kit enables the upgrade to huge 13” Front & 11.6" Rear Cobra Mustang brakes and the use of late model 17" SN95 wheels all in one kit. Both benefits are fully integrated into one comprehensive design.• "COBRA REAR" disc brake conversion kit enables the upgrade to COBRA rear disc brakes while utilizing traditional wheel sizes and offsets.
• “SN95 Wheel Conversion” kit offers the ability to use late model Mustang wheels on your vintage Pony for that cool resto-mod look while maintaining the original brakes.
• "ARP Racing Wheel Studs" for your Vintage or Late Model SN95 applications.
SN95: 1994-2004 Mustang
GT500 Disc Brake & Wheel Conversion Kit
- Converts front brakes to the HUGE Shelby Mustang GT500 14" rotors w/ 4 piston Brembo calipers
- Converts all four corners to use S197 Shelby Mustang GT500 wheels (or aftermarket equivalent) (18"x9.5" 45mm offset)
- Wheel conversion only kits are also available
- Big performance gains.... 400º lower brake temps on the track
Vintage Mustang & Cougar: 1964 - 1973
COBRA Disc Brake & Wheel Conversion Kit
- Converts all four corners to late model Mustang disc brakes and wheels
- Utilizes 1999-2004 Mustang Cobra, Bullitt, Mach1 and Cobra "R" brakes
- Converts to any 1994-2004 Mustang wheel (17"x8" 30mm offset)
- Front or Rear kits also available
COBRA Rear Disc Brake Conversion Kit
- Enables use of COBRA rear disc brakes while permitting the use of traditional wheel offsets
- Utilizes 1994-2004 Mustang Cobra, Bullitt, Mach I brakes
- Can be used with 15" or larger wheels
- Does not change rear track width
Brake Packages:
- Conversion kits including Calipers, Rotors and Hoses
Vintage SN95 Wheel Conversion Kit
- Enables the use of any 1994-2004 Mustang wheels (17"x8" 30mm offset) with your stock brake system
ARP Racing Wheel Studs
- SN95 Mustang FRONT
- SN95 Mustang REAR
- Vintage Mustang FRONT
- Vintage Mustang REAR
Attention: Only those qualified / experienced in brake service and hydraulic braking systems should attempt the installation of these kits. Sellers of this kit shall not be held liable for it's installation, mis-installation, or performance post installation.
Note: There is a 5% restocking fee for any returned merchandise. Contact for details and requirements.
Note: There is a 5% restocking fee for any returned merchandise. Contact for details and requirements.